Tree felling is a dangerous job that can result in serious injury or death. It is a job that should only be undertaken by skilled and experienced workers who are properly equipped with the necessary safety gear.
Before attempting to fell a tree, you should always plan the cut so that when the tree falls, it does not come into contact with any other trees or objects. It is also important to clear away obstacles such as fences, old stumps and overhead wires so that they do not interfere with the fall.
You should also be able to estimate the height of the tree so that you know where it will land when it falls. A simple measurement technique involves using a stick held at arm’s length and bending it so that the top of the stick lines up with the tree’s crown.
Once you have a good idea of the height of the tree, you can start making the felling cut. The first cut should be a notch that is about one-third of the way down into the tree’s trunk. This is called the hinge and will guide the tree to fall in the desired direction.
Make the notch in a way that it is deep enough to support the weight of your chainsaw but not so deep that it will break under the weight of the cut or the wedge. The notch should be at least four feet high, and the bottom of it should not be closer than two feet to the ground.
After the notch, cut downward on the side of the trunk that will face where it is going to fall, at an angle of about 70 degrees. Be sure to cut at a slow pace so that you do not cause the tree to sway or swing when it is falling.
A safe escape route should be created around the tree so that you can retreat when it starts to fall. This should be at a distance of about 45 degrees behind the tree in both directions, and it should be cleared of branches and other obstructions that could trip you.
When you’re finished, wait a few minutes to make sure there are no dead branches or other debris that can fall to the ground and hurt or kill you. They are called widowmakers and are a major cause of accidents.
Felling is not an easy task and it requires a great deal of planning, focus and caution. It is a job that should not be attempted on a day when you are tired or sick, and it is best to hire a professional for the work.
If the tree is too tall to reach with a saw, it may require a rigging cable to remove it from the ground. This can be a time-consuming process, but it is often the only option when there’s no space for it to fall safely.
You should never try to cut a tree down when it’s windy or raining, as this can cause the limbs to blow away and potentially injure you. This is especially true if you haven’t practiced using the right sawing technique or are working in conditions that are too harsh for your body.
source https://caboolturetreeremoval.wordpress.com/2023/04/20/tree-felling-how-to-safely-fell-a-tree/
No comments:
Post a Comment